Guide
Oven and cooktop installation cost in NZ: swap, induction and gas
A like-for-like oven swap in Auckland starts from $249 through Mitre 10 and AA Home Services. Connecting a new hob and oven, or a fit-off, is about $830–1,480 including GST on one Auckland kitchen electrician's invoices. Induction costs more when it needs a new 32 A circuit; a gas hob swap is from $385 including GST.
Updated
Key takeaways
- Oven, like-for-like replacement in Auckland: from $249 (Mitre 10 via AA Home Services, checked 2 November 2026).
- Connecting a new hob and oven, or fit-off only: about $830–1,480 incl GST (The Conduction Company, Auckland, from recent invoices).
- Electricians charge about $90–140 an hour incl GST, with call-outs around $120 (The Conduction Company, 2026).
- Induction usually needs a 32 A cooking circuit. Consumer NZ's own switch from gas took 5–6 hours and cost $1,173 incl GST, gas disconnection included (November 2025).
- Gas hob swap: from $385 incl GST; first gas hob replacing electric: from $672.75 incl GST, electrical excluded (JVS Gasfitting).
How much does it cost to install an oven in NZ?
From $249 to swap an oven into the same space and the same wiring in Auckland, on Mitre 10's AA Home Services price. A new built-in oven and hob connected together is about $830–1,480 including GST on The Conduction Company's recent Auckland invoices. A new circuit, an isolating switch or a cabinet change costs more.
What you pay depends on what is already in the wall. An oven going into the same cavity on the same cable is an hour or two of an electrician's time. A different size, a new circuit from the switchboard, or a move from a freestanding range to a separate wall oven and hob turns it into cabinetry plus wiring.
| Job | Price | GST | Source |
|---|---|---|---|
| Oven, like-for-like replacement, Auckland | From $249 | Not stated | Mitre 10 via AA Home Services |
| Hob and oven connection, or fit-off only | $830–1,480 | Includes GST | The Conduction Company (Auckland) |
| Electrician's hourly rate, NZ market | $90–140 per hour | Includes GST | The Conduction Company |
| Electrician's call-out fee | About $120 | Includes GST | The Conduction Company |
| Electrician, New Plymouth: first hour incl. local travel | $95, then $80 per hour | Excludes GST | Phasetech Electrical |
| Gas hob replacement, with gas certificate | From $385 | Includes GST | JVS Gasfitting |
| New gas hob replacing electric (2 m pipe, regulator) | From $672.75 | Includes GST | JVS Gasfitting |
Mitre 10's price assumes a direct like-for-like replacement of an existing appliance; extra costs are added on site and the price is for Auckland only. JVS prices exclude parts and any electrician. The appliance itself is extra in every row.
How much does it cost to install an induction cooktop?
Less if the kitchen already has a 32 A cooking circuit, because the electrician only swaps the connection. Consumer NZ's own switch from gas needed a new cable from the switchboard and a gas fitter to cap the gas: 5–6 hours and $1,173 including GST. Its writer says a ceramic cooktop would have cost the same to install.
Most induction cooktops draw a lot of current; the one in Consumer NZ's switch needed 32 amps, and none of the home's existing circuits, rated at 20 amps, could carry it. Lower-draw induction models exist, but they cannot run every zone at full power at once.
The Conduction Company notes that induction usually reuses an existing 32 A cooking circuit, and that AS/NZS 3000 guidance sizes cooktops and ovens up to 13,000 W on a 32 A circuit; above that the load is assessed at 40 A. So the cheap case is an electric cooktop being replaced by induction, and the dear case is gas being replaced by induction in a house with an old switchboard.
Before you buy, check the cooktop's rated load in its installation manual and ask the electrician what the existing circuit is rated for. That one question decides whether the job is a swap or a new cable run.
Do I need an electrician to install an oven or cooktop?
Usually, yes. Ovens and cooktops are generally wired straight into the fixed wiring rather than plugged in, and work on fixed wiring is for a registered electrician, who must give you the certification for it. WorkSafe sets out the few tasks a homeowner may do on their own home's wiring, and they come with conditions.
- Isolating switch. A cooktop needs its own switch near the hob, placed so nobody reaches across the hob to use it (The Conduction Company).
- Clearance. No power point or switch may sit within 150 mm of the cooktop edge, and new socket circuits need 30 mA RCD protection.
- Gas is a separate trade. Capping, moving or connecting a gas supply is gasfitting for an authorised gasfitter, who issues a gas certificate. An electrician cannot do it.
- Keep the paperwork. Ask for the electrical certificate and any gas certificate before the final payment. See who has to be licensed on a kitchen job.
Worked example: three cooking jobs, priced
Swapping a dead oven for the same size in Auckland is from $249. A renovation connecting a new wall oven and induction hob on an existing 32 A circuit sits in the $830–1,480 incl GST band. Replacing a gas hob with induction, with a new cable and the gas capped, was $1,173 incl GST in Consumer NZ's case.
Inside a full renovation, the cooking appliances are wired at fit-off with everything else, and the electrician's share of a whole kitchen is about $2,370–4,900 incl GST on the same Auckland invoices. Our kitchen cost calculator puts that into a budget for your size and region, and the rangehood and dishwasher guides price the other two appliances.
| Job | What it involves | Price | Source |
|---|---|---|---|
| Oven swap, same size and cable | Disconnect, remove, connect and test | From $249 | Mitre 10 via AA |
| New wall oven and induction hob, existing circuit | Connect both, isolating switch, test | $830–1,480 incl GST | The Conduction Company |
| Gas hob to induction, new circuit | New cable to the switchboard, switch, gas capped by a gasfitter | $1,173 incl GST (one job) | Consumer NZ, Nov 2025 |
The Consumer NZ figure is one household's invoice, not a price range; its cable ran through an external wall in weatherproof conduit, which added cost.
Questions
How much does it cost to install an oven in NZ?
From $249 for a like-for-like swap in Auckland through Mitre 10 and AA Home Services. Connecting a new hob and oven is about $830–1,480 including GST on The Conduction Company's recent Auckland invoices.
Does Mitre 10 install ovens?
Yes, through AA Home Services in Auckland, from $249 for a direct like-for-like replacement (checked 2 November 2026). Extra costs approved on site are charged on top.
Does an induction cooktop need a new circuit?
Often. Many induction cooktops need a 32 A circuit. If the kitchen already has one for an electric cooktop it can usually be reused; a home coming off gas may need a new cable from the switchboard.
Can I install an oven myself in NZ?
Not one that is wired into the fixed wiring, which most built-in ovens and cooktops are. That is electrical work for a registered electrician, who provides the certification. WorkSafe lists the narrow exceptions for homeowners.
How much does it cost to swap a gas hob for induction?
Consumer NZ's own switch cost $1,173 including GST for 5–6 hours of electrical and gas work, including capping the gas. The cooktop itself was extra.
Sources
- AA Home Services: Mitre 10 installations (Auckland, checked 31 October 2026)
- The Conduction Company: kitchen electrical in Auckland (prices from recent invoices, 2026)
- Consumer NZ: from gas to glass, our move to electric induction cooking (4 November 2025)
- JVS Gasfitting: pricing (gas hob replacement and new install)
- Phasetech Electrical: labour rates
- WorkSafe NZ: doing your own electrical work
- Electrical Workers Registration Board: documentation from your electrician
Checked 2 November 2026. We re-check every published figure quarterly.
Read next
All guidesRangehood installation cost in NZ: what it costs to fit one, and what pushes it up
Published NZ installation prices, what makes the job cost more, the Healthy Homes ducting rule, and who is allowed to do the wiring.
Read it →Dishwasher installation cost in NZ: swap, new install and what pushes it up
Published NZ prices for a swap and a first install, what adds cost, what you are allowed to connect yourself, and a worked example.
Read it →Who has to be licensed to work on your kitchen
One table: plumbing, gasfitting, fixed wiring and structural work, and the register for each.
Read it →